6 Digital Circuits jobs in Egypt
Embedded Software Engineer-powertrain Systems
Valeo
Posted today
Job Viewed
Job Description
Embedded Software Engineer-Powertrain Systems - ( 22000B2T )
**Mission**:
**We focus on developing innovative technology and systems that reduce fuel consumption in cars and increase efficiency, while keeping the pleasure of driving.**
**CO₂ emission-reduction solutions**:
- **
**Stop-Start system**
: Valeo was the first supplier to offer customers this system that automatically shuts the engine off when a vehicle is at a standstill, saving as much as 15% in fuel consumption in dense urban traffic.
- **
**Mild-hybrid technology (48V)**
: Valeo is working on innovative hybrid solutions that require less fuel consumption and lead to lower CO₂ emissions.
- **
**Electric Supercharger**
: improves vehicle performance by up to 27% without increasing fuel consumption.
*** Being part of software development team in PTS-PEL (PowerTrain Systems Electronics)**:
- Designs and makes all the power and control electronics for the Powertrain Systems Business Group.
- The Team is delivering software to most premium Manufacturers such as Porsche, Daimler, VW, Audi, PSA, Volvo, Jaguar, Land Rover.
- Has the opportunity to work as part of small teams & enhance skills in different parts of the Software that ranges from AutoSAR stacks configuration and Boot-loader development to Micro-controller drivers development, MCAL configuration & Complex Drivers development.
- Using advanced software technologies such as AUTOSAR basic software drivers, Bootloader, Real Time Operating Systems, CAN and Flexray communication, Vehicle diagnostic and Software Safety.
- Has the responsibility to travel & support other PTS teams in France, Norway & China.
*** Job Description**:
Develop Software for embedded systems in C
- Design and Develop Drivers, MCAL, Bootloaders Software
- Configure the different software components according to the specified requirements.
- Deliver and integrate the software component in overall software according to defined high level design.
- Develop component test plans and test cases to verify the correct functionality against the requirements.
- Verify the software component functionalities in a defined HW target/platform.
- Execute static analysis tools and analyze the results.
- Follow defined project processes and ensure process conformance.
- Report work progress continuously through attendance of daily & weekly project internal meetings.
- Contribute effectively in the continuous improvement of his/her project, team, and work environment.
- Raise flags pro-actively for any issue that can impact his/her project or team.
- Report findings (SW Bugs) on the configuration management tool.
**For Seniors SW Engineer**:
- Participate in system and customer requirements analysis for new products.
- Participate in high level design architecture definition for the new products.
- Responsible for system and customer requirements analysis for projects that have high reuse factor.
- Design complicated software component(s) based on defined high-level design.
- Perform technical reviews on software component design, code, and component test, and integrate test strategy and plan.
- Support and coach the team members pro-actively in their daily on-job tasks.
**Mission**:
**We focus on developing innovative technology and systems that reduce fuel consumption in cars and increase efficiency, while keeping the pleasure of driving.**
**CO₂ emission-reduction solutions**:
- **
**Stop-Start system**
: Valeo was the first supplier to offer customers this system that automatically shuts the engine off when a vehicle is at a standstill, saving as much as 15% in fuel consumption in dense urban traffic.
- **
**Mild-hybrid technology (48V)**
: Valeo is working on innovative hybrid solutions that require less fuel consumption and lead to lower CO₂ emissions.
- **
**Electric Supercharger**
: improves vehicle performance by up to 27% without increasing fuel consumption.
*** Being part of software development team in PTS-PEL (PowerTrain Systems Electronics)**:
- Designs and makes all the power and control electronics for the Powertrain Systems Business Group.
- The Team is delivering software to most premium Manufacturers such as Porsche, Daimler, VW, Audi, PSA, Volvo, Jaguar, Land Rover.
- Has the opportunity to work as part of small teams & enhance skills in different parts of the Software that ranges from AutoSAR stacks configuration and Boot-loader development to Micro-controller drivers development, MCAL configuration & Complex Drivers development.
- Using advanced software technologies such as AUTOSAR basic software drivers, Bootloader, Real Time Operating Systems, CAN and Flexray communication, Vehicle diagnostic and Software Safety.
- Has the responsibility to travel & support other PTS teams in France, Norway & China.
*** Job Description**:
Develop Software for embedded systems in C
- Design and Develop Drivers, MCAL, Bootloaders Software
- Configure the different software components according to the specified requirements.
- Deliver and integrate the software component in overall software according to defined high level design.
- Develop component test plans and test cases to verify the correct functionality against the requirements.
- Verify the software component functionalities in a defined HW target/platform.
- Execute static analysis tools and analyze the results.
- Follow defined project processes and ensure process conformance.
- Report work progress continuously through attendance of daily & weekly project internal meetings.
- Contribute effectively in the continuous improvement of his/her project, team, and work environment.
- Raise flags pro-actively for any issue that can impact his/her project or team.
- Report findings (SW Bugs) on the configuration management tool.
**For Seniors SW Engineer**:
- Participate in system and customer requirements analysis for new products.
- Participate in high level design architecture definition for the new products.
- Responsible for system and customer requirements analysis for projects that have high reuse factor.
- Design complicated software component(s) based on defined high-level design.
- Perform technical reviews on software component design, code, and component test, and integrate test strategy and plan.
- Support and coach the team members pro-actively in their daily on-job tasks.
This advertiser has chosen not to accept applicants from your region.
0
Senior Process Electrical Engineer
NNE
Posted today
Job Viewed
Job Description
**Make your ability count at NNE**
- We are experts in end-to-end pharma engineering, and our success is built on our relationships, both with our colleagues and our customers. If you want to work on projects shaping the future of sustainable and intelligent pharma facilities, NNE is the place to be._
- _
**Let’s talk about the nice feeling of working at NNE**
If you have the motivation for solving complex problems, then we have an exciting and innovative project portfolio for you - in fact, we solve up to 1500 large and small projects a year. This means we offer a versatile and complex work environment ensuring lifelong learning.
When we go to work, it is along with many different interdisciplinary disciplines. Our professionalism is based on more than 100 different educational backgrounds throughout the whole organization, and our skilled employees come from many places. It is one of our skills, which also aims to develop the individual's professional growth in the long run.
**How you might spend your days**
***As a Senior Process Electrical Engineer, you'll be working with a diverse, multi-disciplinary team where you will:
- design, specification, supervision, and commissioning of technical installations
- involved in ATEX and functional safety design
- planning and coordinating your own tasks
- actively participating in project teams and sharing new ideas
- tendering work
***
**Who you are**
- At NNE, we care about who you are as a person. Ultimately, who you are and how this determines how you work impacts the work we do as a team. As a person, you are:
- empathetic and people oriented
- structured within your technical skills
- curious and open-minded to learn new things
- personally motivated and are excited about your work
- comfortable with customer relations
- proficient in both spoken and written Danish and English
- you take pleasure in working in a specialist group and working in all scale projects. You are motivated to provide the highest level of support to colleagues. You will have the opportunity to influence your colleagues
**The miles you’ve walked**
- you have at least 5 years of experience
- you have experience from the process industry
- you have a degree within Electrical Engineering, AP Graduate in Service Engineering or similar
**Location**
- Kalundborg
**Department**
- Process Electrical
**Seniority**
- Senior
**Employment Type**
- Full Time
**We’re experts bound by a noble cause and driven by passion**
NNE is short for Novo Nordisk Engineering. And for all of us who work here, NNE means so much more. Some of us are driven by working on highly complex projects together with other leading experts. Others are inspired by a work environment with flat hierarchy and flexible conditions. And some love the fact that they work for a world leading engineering consultancy within the pharma industry. If there's one thing, we all share, it's the passion for what we do. Together we design and build pharma facilities that are essential for millions of patients all over the world.
Sounds like something you’d like to do? If you’re ready to join our passion, let’s hear from you.
Questions before applying? Please contact Manager David Bjørn Pedersen +45 3075 3334
To ensure an efficient and fair recruitment process, we encourage you to refrain from adding a photo in your CV. At NNE, we commit to an inclusive recruitment process and equality of opportunity for all our job applicants.
We will invite to interviews on a running basis.
- We are experts in end-to-end pharma engineering, and our success is built on our relationships, both with our colleagues and our customers. If you want to work on projects shaping the future of sustainable and intelligent pharma facilities, NNE is the place to be._
- _
**Let’s talk about the nice feeling of working at NNE**
If you have the motivation for solving complex problems, then we have an exciting and innovative project portfolio for you - in fact, we solve up to 1500 large and small projects a year. This means we offer a versatile and complex work environment ensuring lifelong learning.
When we go to work, it is along with many different interdisciplinary disciplines. Our professionalism is based on more than 100 different educational backgrounds throughout the whole organization, and our skilled employees come from many places. It is one of our skills, which also aims to develop the individual's professional growth in the long run.
**How you might spend your days**
***As a Senior Process Electrical Engineer, you'll be working with a diverse, multi-disciplinary team where you will:
- design, specification, supervision, and commissioning of technical installations
- involved in ATEX and functional safety design
- planning and coordinating your own tasks
- actively participating in project teams and sharing new ideas
- tendering work
***
**Who you are**
- At NNE, we care about who you are as a person. Ultimately, who you are and how this determines how you work impacts the work we do as a team. As a person, you are:
- empathetic and people oriented
- structured within your technical skills
- curious and open-minded to learn new things
- personally motivated and are excited about your work
- comfortable with customer relations
- proficient in both spoken and written Danish and English
- you take pleasure in working in a specialist group and working in all scale projects. You are motivated to provide the highest level of support to colleagues. You will have the opportunity to influence your colleagues
**The miles you’ve walked**
- you have at least 5 years of experience
- you have experience from the process industry
- you have a degree within Electrical Engineering, AP Graduate in Service Engineering or similar
**Location**
- Kalundborg
**Department**
- Process Electrical
**Seniority**
- Senior
**Employment Type**
- Full Time
**We’re experts bound by a noble cause and driven by passion**
NNE is short for Novo Nordisk Engineering. And for all of us who work here, NNE means so much more. Some of us are driven by working on highly complex projects together with other leading experts. Others are inspired by a work environment with flat hierarchy and flexible conditions. And some love the fact that they work for a world leading engineering consultancy within the pharma industry. If there's one thing, we all share, it's the passion for what we do. Together we design and build pharma facilities that are essential for millions of patients all over the world.
Sounds like something you’d like to do? If you’re ready to join our passion, let’s hear from you.
Questions before applying? Please contact Manager David Bjørn Pedersen +45 3075 3334
To ensure an efficient and fair recruitment process, we encourage you to refrain from adding a photo in your CV. At NNE, we commit to an inclusive recruitment process and equality of opportunity for all our job applicants.
We will invite to interviews on a running basis.
This advertiser has chosen not to accept applicants from your region.
1
O&m Electrical Engineer (vois)
Cairo, Al Qahirah
Vodafone
Posted today
Job Viewed
Job Description
**Role purpose**:
The role holder is accountable for Operation and Maintenance activities for the assigned buildingbuildings, from the electrical point of view in addition to the followings:
- Handle all related operation & maintenance activities in the assigned buildingbuildings.
- Follow-up on managed service company works in the assigned buildingbuildings.
- Close monitoring on the work performance in the assigned buildingbuildings.
- Follow-up on preventive maintenance works schedules as plan.
- Coordinate with all stakeholders to ensure all Vodafone internal requirement are considered
- Prepare the needed executive summary & BCs for the needed works on premises.
- Review existing building designs for any proposed enhancementschanges to ensure do ability.
- Establish full design package for the needed enhancementschanges on the assigned buildingbuildings.
- Establish detailed BOQ of works.
- Select the efficient type of equipment & durable materials used & proper vendor selection.
- Coordinate with SCM till awarding the works to vendors.
- Coordinate with H&S till awarding the works to vendors.
- Supervise construction contractorsvendors during implementation phase with a proper handing over.
- Comply with all H&S procedures
- Meet assigned OPEX & CAPEX
**Key accountabilities and decision ownership**
Impact on Business (Accountable for Electric systems operations across the building, responsible of delivering the working environment to our employees across the building, close monitoring on day to day activities, continuous efforts to enhance employee experience).
Mandatory tasks (follow-up & reporting on projects timelines, ensure abidance to projects critical path; ensure delivery with the required cost & desired quality)
Project documents (understand VF internal requirements, establish project layouts, prepare Bill of Quantities for tendering, coordinate with SCM for vendors evaluation till selection, supervise implementation activities, proper project closing)
Health & Safety (Close alignment with H&S team to review H&S plans submitted from vendors, ensure all suppliersvendors are complying with H&S Plan, ensure that all incidents within P&FM areas are well investigated & reported, conduct regular meeting with suppliers & vendors to increase the awareness).
**Core competencies, knowledge and experience**
- Customer focus
- Team player.
- Very good analytical skills.
- Close Monitoring & follow-up techniques.
**Must have technical / professional qualifications**:
- BSC in Electrical Engineering, Construction background, Operation & Maintenance background, design background.
- PC Knowledge: AUTOCAD, MS Office, MS project.
- Health & Safety knowledge background
_VOIS
The role holder is accountable for Operation and Maintenance activities for the assigned buildingbuildings, from the electrical point of view in addition to the followings:
- Handle all related operation & maintenance activities in the assigned buildingbuildings.
- Follow-up on managed service company works in the assigned buildingbuildings.
- Close monitoring on the work performance in the assigned buildingbuildings.
- Follow-up on preventive maintenance works schedules as plan.
- Coordinate with all stakeholders to ensure all Vodafone internal requirement are considered
- Prepare the needed executive summary & BCs for the needed works on premises.
- Review existing building designs for any proposed enhancementschanges to ensure do ability.
- Establish full design package for the needed enhancementschanges on the assigned buildingbuildings.
- Establish detailed BOQ of works.
- Select the efficient type of equipment & durable materials used & proper vendor selection.
- Coordinate with SCM till awarding the works to vendors.
- Coordinate with H&S till awarding the works to vendors.
- Supervise construction contractorsvendors during implementation phase with a proper handing over.
- Comply with all H&S procedures
- Meet assigned OPEX & CAPEX
**Key accountabilities and decision ownership**
Impact on Business (Accountable for Electric systems operations across the building, responsible of delivering the working environment to our employees across the building, close monitoring on day to day activities, continuous efforts to enhance employee experience).
Mandatory tasks (follow-up & reporting on projects timelines, ensure abidance to projects critical path; ensure delivery with the required cost & desired quality)
Project documents (understand VF internal requirements, establish project layouts, prepare Bill of Quantities for tendering, coordinate with SCM for vendors evaluation till selection, supervise implementation activities, proper project closing)
Health & Safety (Close alignment with H&S team to review H&S plans submitted from vendors, ensure all suppliersvendors are complying with H&S Plan, ensure that all incidents within P&FM areas are well investigated & reported, conduct regular meeting with suppliers & vendors to increase the awareness).
**Core competencies, knowledge and experience**
- Customer focus
- Team player.
- Very good analytical skills.
- Close Monitoring & follow-up techniques.
**Must have technical / professional qualifications**:
- BSC in Electrical Engineering, Construction background, Operation & Maintenance background, design background.
- PC Knowledge: AUTOCAD, MS Office, MS project.
- Health & Safety knowledge background
_VOIS
This advertiser has chosen not to accept applicants from your region.
2
Electrical Engineer for Variable Speed Drives
Danfoss
Posted today
Job Viewed
Job Description
Requisition ID: 28385- Job Location(s): Graasten, DKDanfoss Drives is looking for an Electrical Engineer to join our Electrical Product Engineering team of 10 skilled and committed engineers, driving product innovation and customer satisfaction by combining innovative product knowledge, engineering skills, and new technology into solutions.
We are engineering solutions which help increasing energy efficiency and thus lowering carbon emissions. At Danfoss Drives in Graasten we develop and produce variable speed drives; The VLT®, which is a part of our green strategy, to develop electronics for a sustainable tomorrow.
You will join a diverse and committed team with an open and inclusive culture and plenty of opportunity to learn new things. There is room for technical and personal development as well as having a great impact on our business. During the workweek there is also room for flexibility.
**Responsibilities**:
If you take the opportunity as our new Electrical Engineer, you will experience a wide range of responsibilities, in bigger projects and in diverse smaller range of tasks. You will be working with a variety of different technologies within electronics, collaborating with cross organization functions as well as meeting suppliers and customers.
You will become technical responsible in all aspects of developing power electronics including component qualification, circuits design, printed circuit board
- and VLT® analysis, as well as coordinating the implementation of your solution to the product in our production. Furthermore, you will be working with:
- Technologies like SMPS, inductors, IGBT, gate-drive, thyristors, and basic analog circuit
- Engineering test in our own lab incl. troubleshooting and redesigning
- Circuit simulation as well as failure mode analysis
**Background & Skills**:
You have a Bachelor
- or Master degree in electrical engineering, or equivalent. You have some years of experience within design of electronics (preferrable power electronics) and are used to work with basic analog-, and probably also with EMC correct design. You might even be familiar with other focus areas like digital design or embedded electronics.
On a more personal note, you thrive on solving technical problems, both independently and together with a multidisciplinary engineering team, and you are not afraid of jumping into new tasks. You have a high sense of urgency, you manage to work on several fronts, and understand the importance of involving others.
**For further information about the position,** please contact Senior Manager of Electrical Engineering, Harri Christensen on
+45 7488 5932
. For questions about the recruitment process please contact Recruiter, Lisa Tveen om +45 2859 4039.
**Danfoss - Engineering Tomorrow**:
At Danfoss, we are engineering solutions that allow the world to use resources in smarter ways - driving the sustainable transformation of tomorrow. No transformation has ever been started without a group of passionate, dedicated and empowered people. We believe that innovation and great results are driven by the right mix of people with diverse backgrounds, personalities, skills, and perspectives, reflecting the world in which we do business. To make sure the mix of people works, we strive to create an inclusive work environment where people of all backgrounds are treated equally, respected, and valued for who they are. It is a strong priority within Danfoss to improve the health, working environment and safety of our employees.
Following our founder’s mindset ‘action speaks louder than words’, we set ourselves ambitious targets to protect the environment by embarking on a plan to become CO2 neutral latest by 2030.
Danfoss is an EO employer and VEVRAA Federal Contractor. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, or other protected category.
We are engineering solutions which help increasing energy efficiency and thus lowering carbon emissions. At Danfoss Drives in Graasten we develop and produce variable speed drives; The VLT®, which is a part of our green strategy, to develop electronics for a sustainable tomorrow.
You will join a diverse and committed team with an open and inclusive culture and plenty of opportunity to learn new things. There is room for technical and personal development as well as having a great impact on our business. During the workweek there is also room for flexibility.
**Responsibilities**:
If you take the opportunity as our new Electrical Engineer, you will experience a wide range of responsibilities, in bigger projects and in diverse smaller range of tasks. You will be working with a variety of different technologies within electronics, collaborating with cross organization functions as well as meeting suppliers and customers.
You will become technical responsible in all aspects of developing power electronics including component qualification, circuits design, printed circuit board
- and VLT® analysis, as well as coordinating the implementation of your solution to the product in our production. Furthermore, you will be working with:
- Technologies like SMPS, inductors, IGBT, gate-drive, thyristors, and basic analog circuit
- Engineering test in our own lab incl. troubleshooting and redesigning
- Circuit simulation as well as failure mode analysis
**Background & Skills**:
You have a Bachelor
- or Master degree in electrical engineering, or equivalent. You have some years of experience within design of electronics (preferrable power electronics) and are used to work with basic analog-, and probably also with EMC correct design. You might even be familiar with other focus areas like digital design or embedded electronics.
On a more personal note, you thrive on solving technical problems, both independently and together with a multidisciplinary engineering team, and you are not afraid of jumping into new tasks. You have a high sense of urgency, you manage to work on several fronts, and understand the importance of involving others.
**For further information about the position,** please contact Senior Manager of Electrical Engineering, Harri Christensen on
+45 7488 5932
. For questions about the recruitment process please contact Recruiter, Lisa Tveen om +45 2859 4039.
**Danfoss - Engineering Tomorrow**:
At Danfoss, we are engineering solutions that allow the world to use resources in smarter ways - driving the sustainable transformation of tomorrow. No transformation has ever been started without a group of passionate, dedicated and empowered people. We believe that innovation and great results are driven by the right mix of people with diverse backgrounds, personalities, skills, and perspectives, reflecting the world in which we do business. To make sure the mix of people works, we strive to create an inclusive work environment where people of all backgrounds are treated equally, respected, and valued for who they are. It is a strong priority within Danfoss to improve the health, working environment and safety of our employees.
Following our founder’s mindset ‘action speaks louder than words’, we set ourselves ambitious targets to protect the environment by embarking on a plan to become CO2 neutral latest by 2030.
Danfoss is an EO employer and VEVRAA Federal Contractor. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, or other protected category.
This advertiser has chosen not to accept applicants from your region.
3
Electrical Maintenance Engineer
PepsiCo
Posted today
Job Viewed
Job Description
**Responsibilities**
- Maintain the equipment within the required efficiency.
- Lead/support the working team administratively and technically on daily basis.
- Achieve and analyze maintenance key performance indicators and issue periodic follow-up reports.
- Achieve & follow-up weekly electricity, water, gas consumption.
- Control the maintenance expenses on a weekly basis.
- Revise and sign on SPs( Spare Parts) withdrawal above MLE 10.
- Cooperate with purchasing department for any technical issues.
- Revise spare parts strategic items on annual basis.
- Revise the work orders completion with spare parts withdrawal and ensure that the replaced used parts are returned back to the Store.
- Review and modify the spare parts item cards limits to ensure spare parts availability.
- Review and sign on purchasing orders and technically approve supplier’s offers.
- Revise, check and approve imported spare parts orders.
- Technically inspect/accept new spare parts and receive on the system.
- Make sure that all workshop equipment is working properly.
- Participate in planning and preparation for projects.
- Follow up on contractors’ daily performance & on site activities progress, ensuring quality & conformity to specifications.
- Annual revise for equipment fixed assists registry.
- Responsible for implementing AIBI(American Institute for Baking Industry Audit), TPM(Total Productive Maintenance), EMS(Environmental Management System) ERP (Employee Risk Protection) systems
- Enhance the equipment performance by updating the PM(preventive maintenance) programs.
- Raising-up team skills by internal technical training and coach new team members.
- Follow up on the Proper execution of the TPM processes and ensure proper implementation of the required aspects in each step.
**Qualifications**
- Engineering Graduate (Electrical Major)
- 1-2 years of Experience in the same field
- Leadership skills.
- Communication & Presentation skills.
- Write and speak English fluently.
- Good computer skills
- Time Management.
- Problems Analysis and solving
- Maintain the equipment within the required efficiency.
- Lead/support the working team administratively and technically on daily basis.
- Achieve and analyze maintenance key performance indicators and issue periodic follow-up reports.
- Achieve & follow-up weekly electricity, water, gas consumption.
- Control the maintenance expenses on a weekly basis.
- Revise and sign on SPs( Spare Parts) withdrawal above MLE 10.
- Cooperate with purchasing department for any technical issues.
- Revise spare parts strategic items on annual basis.
- Revise the work orders completion with spare parts withdrawal and ensure that the replaced used parts are returned back to the Store.
- Review and modify the spare parts item cards limits to ensure spare parts availability.
- Review and sign on purchasing orders and technically approve supplier’s offers.
- Revise, check and approve imported spare parts orders.
- Technically inspect/accept new spare parts and receive on the system.
- Make sure that all workshop equipment is working properly.
- Participate in planning and preparation for projects.
- Follow up on contractors’ daily performance & on site activities progress, ensuring quality & conformity to specifications.
- Annual revise for equipment fixed assists registry.
- Responsible for implementing AIBI(American Institute for Baking Industry Audit), TPM(Total Productive Maintenance), EMS(Environmental Management System) ERP (Employee Risk Protection) systems
- Enhance the equipment performance by updating the PM(preventive maintenance) programs.
- Raising-up team skills by internal technical training and coach new team members.
- Follow up on the Proper execution of the TPM processes and ensure proper implementation of the required aspects in each step.
**Qualifications**
- Engineering Graduate (Electrical Major)
- 1-2 years of Experience in the same field
- Leadership skills.
- Communication & Presentation skills.
- Write and speak English fluently.
- Good computer skills
- Time Management.
- Problems Analysis and solving
This advertiser has chosen not to accept applicants from your region.
4
Electrical Operation Engineer
ALSTOM
Posted today
Job Viewed
Job Description
At Alstom, we understand transport networks and what moves people. From high-speed trains, metros, monorails, and trams, to turnkey systems, services, infrastructure, signalling and digital mobility, we offer our diverse customers the broadest portfolio in the industry. Every day, 80,000 colleagues lead the way to greener and smarter mobility worldwide, connecting cities as we reduce carbon and replace cars.
Could you be the full-time Electrical Operation Engineer in Egypt we’re looking for?
**Your future role**
You’ll specifically take care of delivering Turnkey project, making sure it aligns with contractual requirements and customer expectations.
You’ll Play an important role in operations and maintenance by ensuring that all electrical systems and equipment in a facility are operating safely, efficiently, and effectively.
We’ll look to you to:
- Support to Line Electrical Controller to handle any Incident, Accident, near miss and recovery measures on zone controlled by Temporary Operation Organization,
- Take charge of overall Radio Communications to Line Electrical Controller, other Electrical Operation Nominated Person and OCC (when in operation).
- Perform any other duties assigned by the Line Electrical Controller related to the function.
**All about you**
We value passion and attitude over experience. That’s why we don’t expect you to have every single skill. Instead, we’ve listed some that we think will help you succeed and grow in this role:
- Aware of the electrical risks and able to ensure the safety of not electrical minded persons working in an electrical environment.
- Experience in performing manual and remote switching in electrical substations.
- Knowledge on electrical substations operation.
- Fluent in the English and Arabic languages.
- Electrical Power Supply Field certification as legally required to be employed as an Electrical Controller in a medium power substation.
- Experience in Railway Electrical Traction Operation (Third rail system).
**Things you’ll enjoy**
Join us on a life-long transformative journey - the rail industry is here to stay, so you can grow and develop new skills and experiences throughout your career. You’ll also:
- Enjoy stability, challenges and a long-term career free from boring daily routines
- Collaborate with transverse teams and helpful colleagues
- Contribute to innovative projects
- Steer your career in whatever direction you choose across functions and countries
- Benefit from our investment in your development, through award-winning learning
- Benefit from a fair and dynamic reward package that recognises your performance and potential, plus comprehensive and competitive social coverage.
**Job Segment**:Facilities, Supply, Operations
Could you be the full-time Electrical Operation Engineer in Egypt we’re looking for?
**Your future role**
You’ll specifically take care of delivering Turnkey project, making sure it aligns with contractual requirements and customer expectations.
You’ll Play an important role in operations and maintenance by ensuring that all electrical systems and equipment in a facility are operating safely, efficiently, and effectively.
We’ll look to you to:
- Support to Line Electrical Controller to handle any Incident, Accident, near miss and recovery measures on zone controlled by Temporary Operation Organization,
- Take charge of overall Radio Communications to Line Electrical Controller, other Electrical Operation Nominated Person and OCC (when in operation).
- Perform any other duties assigned by the Line Electrical Controller related to the function.
**All about you**
We value passion and attitude over experience. That’s why we don’t expect you to have every single skill. Instead, we’ve listed some that we think will help you succeed and grow in this role:
- Aware of the electrical risks and able to ensure the safety of not electrical minded persons working in an electrical environment.
- Experience in performing manual and remote switching in electrical substations.
- Knowledge on electrical substations operation.
- Fluent in the English and Arabic languages.
- Electrical Power Supply Field certification as legally required to be employed as an Electrical Controller in a medium power substation.
- Experience in Railway Electrical Traction Operation (Third rail system).
**Things you’ll enjoy**
Join us on a life-long transformative journey - the rail industry is here to stay, so you can grow and develop new skills and experiences throughout your career. You’ll also:
- Enjoy stability, challenges and a long-term career free from boring daily routines
- Collaborate with transverse teams and helpful colleagues
- Contribute to innovative projects
- Steer your career in whatever direction you choose across functions and countries
- Benefit from our investment in your development, through award-winning learning
- Benefit from a fair and dynamic reward package that recognises your performance and potential, plus comprehensive and competitive social coverage.
**Job Segment**:Facilities, Supply, Operations
This advertiser has chosen not to accept applicants from your region.
Be The First To Know
About the latest Digital circuits Jobs in Egypt !
5